Metalcloak Instruction Downloads & Support - Just Choose Your Rig Below
Latest Topics

  Author   Comment  
Reply with quote  #1 
Please click the link below to view instructions (.pdf) referenced in the title of this thread.

Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from Metalcloak. 
Users of Metalcloak products follow the advice of others at their own risk.

David Moore
Reply with quote  #2 
2017 JK Rubicon 2-Door Brake Light was on White/Yellow Stripe instead of White/Black Stripe indicated in the instructions.  Remove the tail light and probe the connector to verify the correct wires to tie into.
Justin Phillips
Reply with quote  #3 
I can confirm that the 2018 jk has the white and yellow to feed the brake power.
Brian Ashabranner
Reply with quote  #4 
I too confirm for the 2008 JKU the instructions are incorrect.  you need to connect to the yellow/white wire instead of the black/white.  it wasn't a big deal though and install was quick and easy.
Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.