Metalcloak Instruction Downloads & Support - Just Choose Your Rig Below
Latest Topics

  Author   Comment  
Reply with quote  #1 
Please click the link below to view instructions (.pdf) referenced in the title of this thread.

 Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.


If you notice a post that has been deleted, we likely implemented the idea into our published instructions.
Questions about your installation?

Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from Metalcloak. 
Users of Metalcloak products follow the advice of others at their own risk.

Reply with quote  #2 
Where's the instructions for the 2.5" Game Changer installation?
Will @ MetalCloak
Reply with quote  #3 
The same instructions are correct for the 2.5" kit.
Reply with quote  #4 
So to clarify - in Section 3, Step 2 the control arm measurements are the same for BOTH the 2.5 and 3.5 install?

If not, can you provide any correct measurements for the 2.5 set.
Reply with quote  #5 
Just to clarify David, (I know your post is old) but yes the same 3.5 kit measurements can be used for the 2.5 kit.  What I didn't see in the instructions was the front and rear track bar measurements but I was able to find them online.  After taking it for an alignment with the provided lengths it came back with a slight adjustment to the toe and that's it, everything else was within spec.

Front track bar = 34 1/2 inch
Rear track bar = 37 3/4 inch

Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.