Metalcloak Instruction Downloads & Support - Just Choose Your Rig Below
Latest Topics
 
 
 


Reply
  Author   Comment  
MetalCloak
Reply with quote  #1 
Please click the link below to view instructions (.pdf) referenced in the title of this thread.
 
 
Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!
 
Only One Rule...Please Be Cool.
 
If you notice a post that has been deleted, we likely implemented the idea into our published instructions.
 
Questions about your installation?
Please email [email protected] or call 916-631-8071 
 
The comments in this forum do not represent official advice from Metalcloak. 
Users of Metalcloak products follow the advice of others at their own risk.
 
Brian
Reply with quote  #2 
A few brief comments regarding installation of the LED marker lights.

1) the use of a grommet where wiring penetrates the inner fender is helpful in providing protection, and simplifying wire management.
2) using a silicone based dielectric compound/grease will help keep water out and slow or even prevent corrosion at the connector crimp locations and improve reliability.
delbert galloway
Reply with quote  #3 
is there anyway you can help me with the wiring of the combination running light/turn signal leds. I used the original wires that went to my stock fenders, but only have turn signal lights and no running lights. I am in the process of trying to locate a turn signal flasher to control the hyper led flashers. any advice would be greatly appreciated. purchased your front and rear fenders from performance muffler and truck parts in Gulfport, ms.  you fabricate a great product. thanks DELBERT GALLOWAY     06 jeep wrangler rubicon
Ken Heburn
Reply with quote  #4 
On the PDF file page 10:Both K. & L. steps say BLINKER.  One should say MARKER... 

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.