Metalcloak Instruction Downloads & Support - Just Choose Your Rig Below
Latest Topics

  Author   Comment  
Reply with quote  #1 
Please click the link below to view instructions (.pdf) referenced in the title of this thread.

JK Full RockSport Steering System

Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email [email protected] or call 916-631-8071

The comments in this forum do not represent official advice from Metalcloak.
Users of Metalcloak products follow the advice of others at their own risk.

Reply with quote  #2 
Awaiting delivery of track bar and draglink components.  Are torque specs any different then stock application?  Use of antiseize?
Thank You
Ken Wuytens
Reply with quote  #3 
The instructions for the steering system could include a few more pictures, it was hard to see exactly where the clamp was to go on the tie rod end of the shock/stabilizer.  I mounted it so the stud was pretty much 90 degrees up, it turned out that it needed to be rotated back so that the shock/stabilizer did not contact the drag link.  I ended up putting a dent in the shock body, and eventually went with another stabilizer design.  Otherwise, the kit is high quality, the drag link and tie rod are very beefy.
Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.