Metalcloak Instruction Downloads & Support - Just Choose Your Rig Below
Latest Topics
 
 
 


Reply
  Author   Comment  
MetalCloak
Reply with quote  #1 
Please click the link below to view instructions (.pdf) referenced in the title of this thread.


Please assist us in our commitment to continuously improve our installation instructions. If you think information is missing, have advice to share with others, or have clearer pictures/illustrations please post them to this thread. All feedback is greatly appreciated!

Only One Rule...Please Be Cool.

If you notice a post that has been deleted, we likely implemented the idea into our published instructions.

Questions about your installation?
Please email TechHelp@Metalcloak.com or call 916-631-8071 

The comments in this forum do not represent official advice from Metalcloak. 
Users of Metalcloak products follow the advice of others at their own risk.

Shawn
Reply with quote  #2 
FYI. The instructions are for the rear control arms, but there is a typo at the top of page 4 that says "Section 2: FRONT SUSPENSION Installation Instructions". Not a big deal but you may want to correct it.

Feedback: One length is listed for 2.5" - 3.5", but then the important note states that the control arms are shipped for 3.5" lift kits and that they will need to be adjusted for 2.5" lift kits. It isn't clear which is correct. Do you use the same length for 2.5 and 3.5" lift kits or do you need to adjust the length for 2.5" lift kits? If you need to adjust for 2.5" lift kits, why not just list different recommended starting lengths for 2.5" versus the 3.5"? I also recommend clarifying whether to install them with the axle drooped or at ride height, and then, even though it is common sense, to include an instruction to tighten the hardware and lock nuts at ride height.
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.